The P1-1X10 is a single P1 10” SVC subwoofer in a vented enclosure that reproduces low bass frequencies accurately with high output SPL (Sound Pressure Level)
The P1-1X10 vented loaded enclosure is Internally wired to create a 4-Ohm amplifier load with power handling of 250 Watts RMS / 500 Watts Max
In Truck Box

Details:

The Pioneer TS-900M 4-way, 6" x 9", 450 W max power automotive loudspeakers feature Pioneer's OPEN & SMOOTH sound concept that provides a seamless and smooth transition between the woofer and midrange/tweeter drivers to deliver uniform off-axis frequency response optimized for automotive applications where one or more speakers are often aimed away from the listeners' ears. 18 mm and 11mm Super polyethylene terephthalate (PET) hard dome tweeters paired with a 2-1/4" cellulose fiber cone midrange produce clear high and mid frequencies while the 6" x 9" carbon and mica reinforced Injection Molded Polypropylene (IMPP) woofer cone delivers deep, rich bass with low distortion, even at high output. Included multi-fit installation adapters optimize fitment in applicable original equipment (OE) speaker locations, making installation simple and easy. Pioneer's free CarSoundFit app (downloadable on the Apple App Store and Google Play) provides a virtual listening demonstration of these and many other Pioneer car speakers, allowing you to compare between your original speakers and the TS-900M speakers.


450W max power / 90W RMS per speaker
Twin polyethylene terephthalate (PET) hard dome tweeters (11mm and 18mm)
2-1/4" cellulose fiber cone midrange
6" x 9" carbon and mica reinforced Injection Molded Polypropylene (IMPP) cone construction
Multi-fit 6" x 9" adapters included for simple and easy installation
Protective mesh grille included
Light weight elastic polymer surround
Heat resistant voice coil

Fully tested and ready
Sub in great condition
Perimeter Venting for Thermal Management
Ribbed Polyurethane Surround
Signature Yellow Surround Stitching
High-Strength  Leads
Stamped Steel Basket
High Temp Voice Coil
Spring-Loaded Speaker Terminals

Pre-owned but in good working shape.


Feel the Power of the clean and high tech T1D415 black 15” subwoofer including grille and integral trim ring
The Power Series T1D415 is a Dual 4-Ohm subwoofer with power handling rated at 1000 Watts RMS/2000 Watts Max
These bad boys have patented VAST technology that increases surface cone area up to 25% so the T1D415 performs like a much larger woofer
Extreme flexibility for extreme installations with a mounting depth of 8.4”
Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller
15-inch, dual 4-ohm subwoofer with 2000 watts maximum power handling (1000 watts RMS)
Kevlar fiber reinforced paper cone with anodized aluminum dust cap and voice coil former

Get awesome sound in your car audio with help from the AudioPIpe APCLE-2002 2-Channel 1,000-Watt Amplifier. This car audio amplifier delivers power to your speakers and subwoofers for rocking sound and efficient energy use.Enjoy a car power amp that works with your system. This car sound system amplifier controls you rsound with 2-channel operation, built-in variable high/low pass crossover, and remote volume control for subwoofers. This car amp is 2 Ohm stereo stable and 4 Ohm mono stable, so you can use it with your stereo however works best. Connect several speakers with the RCA line input/output jacks. Sound stays crisp and clear thanks to reduced distrortion from adjustable input level controls with ground loop isolation and pulse-width modulated MOFSET power supply.This car audio amp is built to maximize power, sound, and safety. Each input and output connector for power, speakers, and RCA feature platinum-plated connectors to avoid corrosion. The low profile construction is built to last with moisture-resistant circuit boards and aluminum heat sink for efficient heat dissipation. The electronic protection circuity protects the car amp from short circuit, DC offset, and thermal overload.Pump up the sound in your vehicle with the AudioPIpe 2-Channel 1,000-Watt Amplifier.


Get power to your subwoofers and speakers and rock amazing sound with this 1,000-watt, 2-channel car audio power amplifier
Control your sound with 2-channel operation, built-in variable high/low pass crossover, and remote volume control for subwoofers
2 Ohm stereo stable and 4 Ohm monostable
Minimizes distortion with adjustable input level controls with ground loop isolation and pulse-width modulated MOSFET power supply
Electronic protection circuity protects the car amp from short circuit, DC offset, and thermal overload
Features RCA line input/output jacks and platinum-plated power, speaker, and RCA connectors
Low profile construction built to last with moisture-resistant circuit boards and aluminum heat sink for efficient heat dissipation
Remote turn-on with "soft start" muting to prevent that turn-on "thump"
Specifications:
RMS power rating: 4 ohms: 100 watts x 2 channels, 2 ohms: 125 watts x 2 channels, and 4 ohms: 300 watts x 1 channel (Bridged)
Frequency response: 20Hz to 20KHz
Input sensitivity: 0.2-volt to 8-volt
Crossover range: 55Hz to 5.5KHz
THD:
Color: Black
Dimensions (L x W x H): 10.2 x 7 x 2.2 inches

Capacitive Screen Multimedia Player


Screen dimensions: 6.2" TFT full touch screen
Multi-color illumination
Resolution: 800 x 480 high def.
Supports 1080p high res. video
Compatible with: DVD/DVD-R/DVD-RW/DIVX (Mpeg4)/ VCD/ MP3/ CD/ CD-R/ CD-RW
FM Radio Tuner
12 AM Channels
MMC Card, USB port, front AUX-in
Wireless, hands-free function
much more!

Features

For 1000 watt Car Audio Systems

Flexible Power & Ground Cable

Nickel Plated Mini ANL Fuse Holder & Fuse

Package Includes: 17 ft. of 8 AWG Power Cable,

3 ft. 8 AWG Ground Cable,

17 ft. Two Channel RCA Cables

17 ft. Remote Wire,

17 ft. 18 AWG Speaker Cable,

1 Mini ANL Fuse,

1 Mini ANL Fuse Holder, (10) 6in Cable Ties

Product Features:

8 Gauge Complete Pro Series Amplifier Installation Kit
For 1000 watt Car Audio Systems
Flexible Power & Ground Cable
Nickel Plated Mini ANL Fuse Holder & Fuse


Package Includes:

17 ft. of 8 AWG Power Cable
3 ft. 8 AWG Ground Cable
17 ft. Two Channel RCA Cable
17 ft. Remote Wire
17 ft. 18 AWG Speaker Cable
1 Mini ANL Fuse
1 Mini ANL Fuse Holder
(10) 6" Cable Ties

AUDIOPIPE MICRO CLASS-D 4 CHANNEL AMPLIFIER, 1000 WATTS

75 WATTS X 4 @ 2 OHMS
60 WATTS X 4 @ 4 OHMS
DIM (W X H X L) 4.75″ X 1.75″ X 5.625″

CURRENT DRAW: 26 AMPS

SINGLE SIDED CONTROLS/CONNECTIONS
HI/LOW PASS CROSSOVER
HI/LOW LEVEL INPUTS
SIGNAL TO NOISE RATIO: >80DB
FREQUENCY RESPONSE: 20HZ-20KHZ
THD:
HI PASS FILTER: 35HZ-250HZ
LOW PASS FILTER: 35HZ-250HZ

MICRO CLASS D MOSFET AMPLIFIERS

Maximum Power Output: 500W

RMS @ 4 Ohm: 189W

RMS @ 2 Ohm: 364W

RMS @ 1 Ohm: 500W

Input Level: 0.2V ~ 16V

Frequency Response: 10 ~ 250 Hz

THD:

Signal to noise ratio: >80dB

Overload protect system

Dimensions: 4.8” x 1.9” x 6.8”

Includes Bass Remote