The MILWAUKEE metric 32 piece 3/8 in. drive ratchet & socket set was designed from the ground up to offer better access in tight spaces and maximum tool strength. The 90-tooth ratchet tool offers 4 degrees of arc swing and a slim profile design, allowing work in tighter spaces. Innovative socket design has four parallel flats, which deter rolling and are wrench-compatible. Optimized socket geometry helps reduce bolt rounding and stripping. Socket sizes are stamped into the flats for improved easy-to-read visibility. the ratchet and socket kit comes with a removable inner tray, designed to be stored long-term in a steel storage chest. It also comes with a durable carrying case for ultimate portability. The set comes with accessories included so that our users can get every job done, both in the garage and on the jobsite.
This is a used item and will show some signs of wear. The item has been tested and functions as it should.
VARIBALE TEMPERATURE CONTROL : Variable temperature control dial of the heat gun allows for easy heat adjustment from 120-degree Fahrenheit to 1200-degree Fahrenheit
OPTIMAL AIR FLOW : Two fan speeds for optimal air flow
DELIVERING HIGH HEAT : Rated 1500 watts delivering high heat
HANDS FREE USE : Integrated support stand allows heat gun to sit upright
FLEXIBILITY DURING USE : 6 ft. cord provides flexibility during use
This is a gently used item and may show some signs of wear. The item has been tested and functions as it should.
Fixed Dual Head Halogen
Collapsible stand for easy storage
This is a used item and will show some signs of wear. The item has been tested functions as it should.
Up to 700 ft. lbs. of maximum torque and 1200 ft. lbs. of max breakaway torque
Compact design of 8-13/16 in. L
Multi-speed control for a variety of applications (0 to 400/1,200/1,900 RPM)
1/2 in. anvil with detent pin (also available in hog ring)
LED light with 20 second delay for increased visibility
Can handle a 6 ft. to 8 ft. drop
Anvil resistant to shearing and breakage
With battery and charger
This is a gently used item and may show some signs of wear. The item has been tested and functions as it should.
Interchangeable 3/8 in. and 1/4 in. anvils for added versatility
Powerful motor delivers 35 ft./lbs. of maximum torque
Variable speed (0-800 RPM) for a wide range of fastening applications
Electric brake for increased productivity
Can be used as manual ratchet when motor is not engaged
Built-in L.E.D. light illuminates the work area
Weighs only 2.35 lbs. with battery for reduced operator fatigue
Ergonomically designed handle with rubberized soft grip provides increased comfort and control
Low profile design engineered for improved handling in compact areas
Ideal for working in tight spaces and overhead applications
This is a gently used item and may show some signs of wear. The item has been tested and functions as it should.
Compact size maximizes user control
Dust trap collection system keeps the work area clean
Detail finger attachment gets into tight places
Contour attachments sand curved surfaces
Soft body grip provides comfort for prolonged sanding
Independently certified to meet applicable standards
This is a used item and will show some wear. The item has been tested and functions as it should.
Easily join materials from 1/2" to 11/2" thick (12-38mm)
Positioning sliders adjust within 9 depth settings
Comes with Kreg accessories organized in a durable carrying case
This is a gently used item and may show some signs of wear. The item has been tested and functions as it should.
RELIABLE POWER: Delivers 8 Amp rapid charge and maintain to your car, SUV, or small truck battery compatible with standard, AGM, and gel batteries
SMART CHARGING: Microprocessor-controlled automatic amperage rate adjustment and multi-stage charging for added precision, safety, and battery life
HOOK ATTACHMENT: Includes hook attachment for hanging wherever you keep your tools
LED INDICATORS: LED light indicators and start/stop function for ease of use
This is a gently used item and may show some signs of wear. The item has been tested and functions as it should.
8-Volt LXT Lithium-Ion Brushless Compact Router, Tool Only. Smooth performance and precision. Powerful brushless motor delivers performance and accuracy. Makita-built brushless motor delivers faster and more accurate cuts in a variety of materials. The electronically-controlled BL brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application. Variable speed control dial (10,000 - 30,000 RPM) to match the speed to the application. Soft start feature for smoother start-ups and better accuracy. Smooth rack-and-pinion fine depth adjustment system for more precise settings. Slim and ergonomically designed body with rubberized grip for increased comfort and control. Aluminum housing and base for increased durability and accuracy. LED light illuminates the work area. Cam lock system for easy depth adjustments. Uses 1/4 in. shank routers bIt's.
This is a gently used item and may show some signs of wear. The item has been tested and functions as it should.
The Hilti 18V Cordless Drywall Screwdriver offers everything professionals expect of a drywall screwdriver in an impressive cordless design capable of serial production. Designed to handle a wide variety of screw fastening applications, the screwdriver's high-efficiency motor and gearing run fast and long with low heat. The tool allows you to change bit holders quickly and easily, while the silent clutch is ideal for projects in occupied buildings to avoid disruption.
Applications include exterior sheathing, drywall to metal, drywall to wood and framing
Includes the SD 4500-A18 tool body in an impact-resistant kit box battery and charger sold separately
Design lets you rapidly and easily change out bit holders
Directional venting minimizes dust in operator's face
Silent clutch is ideal for occupied buildings such as hospitals and schools
This is a gently used item and may show some signs of wear. The item has been tested and functions as it should.
This is a gently used item and may show some signs of wear. The item has been tested and functions as it should.
The M12 FUEL 3 in. Compact Cut Off Tool delivers multi-material cutting capability in an ergonomic package, optimized for 1-handed use. Spinning at 20,000 RPM and featuring a POWERSTATE Brushless Motor, the 2522 delivers fast and accurate cutting performance in a wide range of materials. The unique reversible blade rotation feature provides users ultimate control over material removal, along with the ability to select their desired blade rotation for the direction they need to cut.
The Lithium-Ion Cordless HACKZALL Reciprocating Saw features a compact and lightweight design for superior control and versatility in tight spaces. The saw is equipped with a powerful motor that delivers up to 3000 SPM and a 1/2 in. stroke length for fast cutting. You can use this saw to cut through a wide range of material, such as drywall, wood and PVC.
The BANKS® 18 GA 1/4 in. Crown Air Stapler is ideal for all general purpose wood fastening. The lightweight, narrow body tool is easy to handle, making it ideal for installing trim in tight areas. The air stapler has 100 staple magazine with an easy-clear front nose hatch. Drives 18 gauge, 1/4 in. crown staples from 5/8 in. to 1-1/2 in. long.
Great drive power for all types of trim and cabinet fastening jobs
Lightweight and narrow tool design
Ergonomic comfort grip
Easy-clear front nose hatch
360 degree adjustable exhaust
This is a gently used item and may show some signs of wear. The item has been tested and functions as it should.
The Makita 1/2 in. Spade Handle Drill (model DS4011) features a well-balanced design with a powerful motor engineered for constant power and speed for industrial drilling and mixing applications. The DS4011 has an 8.5 Amp motor that delivers 600 RPM for increased speed and torque, making it ideal for drilling large holes. The powerful motor is engineered for constant speed for efficient mixing performance. The DS4011 has a heavy duty industrial 1/2 in. drill chuck, with all ball bearing construction for smooth operation and longer tool life.
All-ball bearing construction for durability and longer tool life
Heavy duty industrial 1/2 in. drill chuck engineered for positive bit retention
Rocker switch for quick transition between forward and reverse operation
On-board chuck key storage for fast and convenient bit changes
600 RPM provides increased speed and torque for drilling large holes
Well-balanced design at only 6.3 lbs. for reduced operator fatigue
D-handle rotates 360° with 24 positive stops for multi-position operation
Rubberized grip for increased operator comfort
Powerful 8.5 Amp motor engineered for improved drilling and mixing performance
Double insulated
This is a used item and will show some wear. The item has been tested and functions as it should.
Cap fasteners are the best way to install roofing underlayment, and the STINGER CN100B pneumatic cap nailer helps contractors install betterquickly, efficiently, and safely. The intuitively-designed tool fires 5 cap nails per second when using proper PSI and holds 200 caps and 200 nails which makes for fewer reloads.Winner of both the 2019 Pro Tool Innovation Award and HBS Dealer Golden Hammer Award, the CN100B was recognized for its durable cap magazine thats easy to reload, time-saving features like its bumpfire setting, and its ergonomic and lightweight design that reduces arm fatigue while on the roof.The best tool for a best practice installation of roofing underlayment, the CN100B boasts:-360 tool-free exhaust-Tool-free depth of drive-Holding capacity of 200 caps and 200 nails-Firing capacity of 5 cap nails per second when using proper PSI-Bumpfire and sequential firing modesThe CN100B includes a belt hook, air fitting, and a carrying case. Its designed for exclusive use with the 1 25mm STINGER NailPac, 1 25mm plastic collated caps and 1x.083 25mmx2.1mm full round head ring shank nails available in Electro Galvanized and 304 Stainless Steel.
Install roofing underlayment up to 50% faster with the 4.9 lb 2.22kg pneumatic cap nailer
Tool holds 200 caps and 200 nails for fewer reloads on the job site
Features bumpfire and sequential firing modes, 360 tool-free exhaust, tool-free depth of drive
Use exclusively with STINGER 1 25mm NailPac, plastic collated caps and ring shank nails
This is a used item and will show some signs of wear. The item has been tested and functions as it should.
Metabo Circular Saw:
INCLUDES: C7UR circular saw, 7-1/4" 24T premium framing vpr blade, hex bar wrench, carrying bag
POWER: Powerful 15 AMP motor with an impressive 6800 RPM no load speed for up to 40% faster cutting speed
BEVEL: Capacity of 0 - 55 degrees, with positive stop at 0, 45, and 55 degree
Metabo Reciprocating Saw:
POWER: Professional 36V power with a 4-stage speed selector ranging from 1,700 SPM to 3,000 SPM (Strokes per Minute)
ORBITAL ACTION: Faster cutting through wood for demolition or other applications
LOW VIBRATION: User Vibration Protection decreases vibration by incorporating a dual counter weight system
These are gently used items and may show some signs of wear. The items have been tested and function as they should.
The Dremel 8240 offers high performance and versatility, packaged in a sleek new tool design. As the new flagship 12-Volt cordless rotary tool, the 8240 features an optimized battery platform allowing DIYers to comfortably tackle a wide range of home improvement projects without the distraction of a cord. The powerful 12-Volt/2 AH Lithium-Ion battery provides maximum performance for extended working sessions. The new 8240 provides cord-like power in cordless form giving you the confidence to tackle the toughest of jobs.
This is a gently used item and may show some signs of wear. The item has been tested and functions as it should.
5,000 Watt electric generator
Model GB5000-2
DeVilbiss Air Power Company
premium brushless alternator
-no warranty due to age-
This is a used item and shows some signs of wear. The item has been tested and functions as it should.
Honda's EG2800i packs a lot into a small package. Honda's advanced inverter technology provides 2,800-Watt of quiet, lightweight and fuel-efficient power. At only 67 lbs. this lightweight powerhouse makes it easy to grab and go. This EG2800i can power wide variety of applications, making it an excellent choice for portable use at home, on the job-site and much more. with a long run time of 12-hours on a single tank of fuel the EG2800i keeps you working all day.
This is a used item and will show some slight wear. The item has been tested and functions as it should
Honda's EB2800i packs a lot into a small package. Honda's advanced inverter technology provides 2,800-Watt of quiet, lightweight and fuel-efficient power. At only 67 lbs. this lightweight powerhouse makes it easy to grab and go. The EB2800i can power wide variety of applications, making it an excellent choice for portable use at home, on the job-site and much more. with a long run time of 12-hours on a single tank of fuel, the EB2800i keeps you working all day. Equipped with CO-MINDER you can feel confident that your safety is top priority.
Lightweight portability: at only 67 lbs., the EB2800i is a lightweight powerhouse, its compact size makes it easy to grab and go
Advanced Inverter technology - Honda's Inverter technology ensures our inverter generators produce power that is as reliable as the power you get from your outlets at home
Impressively quiet - only 61 DB
Protected by oil alert shutting the engine off when low oil is detected
EB2800i was designed to meet OSHA and LA-ETL requirements, making it ideal for worksite applications
Fuel efficient - runs up to 12-hours on a single tank of fuel
This is a gently used item and may show some signs of wear. The item has been tested and functions as it should.
The Bosch 11255VSR SDS-plus Bulldog Xtreme 1 In. Rotary Hammer is a versatile, handy tool that features a robust 8.0 Amp motor. From anchoring to large material breaking, it gets the job done right the first time. Engineered in the tradition of legendary Bulldogs, this powerful hammer delivers 2.0 Ft.-Lbs. of impact energy and 0-5,800 no-load BPM, but it weighs just 6.7 Lbs. The multifunction mode selector allows users to easily select among three modes of operation: rotary hammer, rotation only and hammer only. To optimize the chiseling angle, it has Vario-Lock positioning that rotates and locks the chisel in one of 36 different positions. It is Bosch's PRO+GUARD dust system, helping users move toward OSHA Silica Table 1 dust compliance. The hammer is designed with an ergonomic D-handle for comfort. It features a variable-speed reversing trigger for accurate bit starting, and a Bosch-exclusive rotating brush plate, for equal power in forward and reverse. Busy pros will appreciate the tool's HammerHook, which allows the user to hang the tool on the job, and the SDS-plus system provides for tool-free bit changes.
Robust 8.0 Amp rotary hammer - delivers 2.0 Ft.-Lbs. of impact energy with three modes of operation and rotating chisel lock
Vario-Lock positioning - rotates and locks chisel to optimize working angle
Variable-speed trigger with reversing - offers accurate bit starting
Integral clutch - disengages torque transmission if the bit gets into a bind-up scenario
Works with Bosch PRO+GUARD dust solutions - an end-to-end dust-collection system that helps users move toward OSHA silica table 1 dust compliance
Multi-function selector - three modes of operation: rotary hammer, rotation only and hammer only
Bosch-exclusive rotating brush plate - provides equal power in forward and reverse
HammerHook - allows quick tool storage during the job
D-handle design - ideal for overhead and downward drilling applications
SDS-plus bit system - tool-free bit changes with automatic bit locking
This is a gently used item and may show some signs of wear. The item has been tested and functions as it should.
Easily install trim by using this Pneumatic 16-Gauge Straight Finish Nailer. It fits comfortably in your hand with its smart design. Prepare for an easy maintenance process with this tool.
Best in class ergonomics designed with enhanced features to optimize balance, maximize comfort, reduce fatigue and increase productivity
Reliability and durability that saves you time
Low maintenance oil-free design allows for long term, maintenance-free operation which reduces cleanup time and associated costs
Compact design allows maneuverability to access tight spaces
Each time the trigger is pulled, the nail drives flush into the trim for consistent nailing
Open line of sight for precise nail placement
Flared out trigger allows for two finger placement to assist your index reach
Handle is designed so you can fully grip the handle for improved comfort and balance
Rubberized grip with shock absorbing material provides additional comfort and reduces recoil
Rear exhaust blows air out of the back of the handle and away from you
Tool-free depth of drive is easy to adjust, even with gloves on
No mar tip protects premium wood
This is a gently used item and may show some signs of wear. The item has been tested and functions as it should.
The Duo-Fast Coil Siding Nailer is recommended for use in siding, fencing and decking applications. This air nailer features durable construction that is designed to help withstand job-site abuse over time. It optimizes productivity thanks to a lightweight design that helps minimize arm fatigue. This tool's powerful performance and tool-free depth of drive help flush drive 1-1/2 - 2-1/2 in. nails.
Powerful tool drives nails into surfaces
Reliable performance helps eliminate the need to go back and caulk
Tool-free depth of drive offers flush driving
Adjustable exhaust port for your convenience
Coil loading type
Lightweight tool weighs only 4.5 lb. to help minimize arm fatigue
This is a gently used item and may show some signs of wear. The item has been tested and functions as it should.
VoltAlert technology for non-contact voltage detection
AutoVolt automatic AC/DC voltage selection. DC millivolts - Range : 600.0 mV, Resolution : 0.1 mV
Low input impedance: helps prevent false readings due to ghost voltage
Large white LED backlight to work in poorly lit areas
This is a gently used item and may show some signs of wear. The item has been tested and functions as it should.
No demo is too tough for the FLEX 24V Reciprocating Saw. This saw features fast, orbital cutting action and delivers more cuts per charge. Vibration suppression reduces fatigue. Switch blades on-the-fly with quick and easy, keyless blade eject. Built-in LED lighting illuminates your site. All this comes with the FLEX Advantage of unmatched 24V battery power, runtime, and faster charging
The FLEX 24V 1/2" 2-Speed Drill Driver with Turbo Mode dominates drilling applications with industry-leading torque (1,400 in-lbs). Durable tool construction further ensures you're equipped for the long haul. Built-in LED lighting adds visibility in dark spaces. Anti-kickback protection detects tool jams letting you work confidently. This driver also delivers the FLEX Advantage of unmatched battery power, runtime, and faster charging.
These are gently used items and may show some signs of wear. The items have been tested and functions as they should.
The PIERCE® 15° Professional Coil Siding Nailer is engineered for heavy use on construction jobsites. The superior drive power sinks 2-1/2 in. nails into wood and the tool-less depth of drive adjustment allows for exact nail depth control. Designed with switchable trigger, single sequential and high speed contact operation. Equipped with a high capacity, side load canister for fast and easy reloads.
Superior drive power sinks 2-1/2 in. nails into fiber cement siding, wood siding, wood planks
Rugged construction built for everyday use on construction job sites
Switchable trigger, single sequential and high speed contact operation modes
High capacity, side load canister for fast and easy reloads
Non-marring nose cap attachment protects material from marking
This is a gently used item and may show some signs of wear. The item has been tested and functions as it should.
• Includes T27-T55 plus GM® style T47 sockets in a storage tray
• High-grade steel for strength and reliability
• Use of a standard TORX® bit socket on a TORX Plus® fastener may result in a rounded out fastener head or damaged bit socket
This is a used item and may show some signs of wear. The item has been tested and functions as it should.
RIDGID introduces the 15-Degree 1-3/4 in. Coil Roofing Nailer. This roofing nailer is a perfect combination of power, weight, and speed. Packed with FASTEN EDGE Technology, an industry leading feature set, this nailer can take on any roofing job. The Coil Roofing Nailer comes with a swivel connect, oil, hex key and no-mar pads.
This is a gently used item and may show some signs of wear. The item has been tested and functions as it should.
The Makita 4 in. x 24 in. Belt Sander combines power and speed with ease-of-use features for superior performance. Ideal for woodworkers, carpenters, furniture makers, floor installers, deck builders and general contractors, the powerful 11 Amp motor with electronic speed control maintains constant speed under load and allows fast material removal with a 4 in. wide belt and speed of 1640 ft. per minute. Featuring outstanding dust collection, this sander has a large front grip for comfortable use, an extra long cord for easy maneuverability and labyrinth construction for long-lasting durability.
Low noise operation at 84 dB
4 in. wide belt with a speed of 1640 ft./minute for fast material removal
Labyrinth construction seals and protects motor and bearings from dust and debris for longer tool life
Large front grip is positioned for operator comfort
Innovative design for sanding flush to wall with nose and side of sander
Powerful 11-Amp motor for high production applications
Cord is located on the upper portion of the handle for operator convenience
Dust bag swivels 360 Degree for more convenient operation
Double insulated
This is a used item and will show some signs of wear. The item has been tested and functions as it should.
Oil-free, direct-drive, single-stage pump for long life and no maintenance
Working pressure of 70-100 PSI
Tank pressure gauge measures pressure level of stored air
Built in air hose.
This is a gently used item and may show some signs of wear. The item has been tested and functions as it should.
ESSENTIAL ACCESS IN TIGHT SPACES. Less than 5" in overall length makes this cordless impact wrench the ultimate access tool while delivering 300 ft. lbs. breakaway torque
MAXIMUM PRODUCTIVITY WITH BRUSHLESS MOTOR. Powerful and efficient brushless motor technology provides high torque and longer durability of the tool
REDUCE USER FATIGUE FOR EXTENDED USE. Patented hammer mechanism reduces vibration and a soft TPR grip increases comfort when using the impact wrench
LIGHT UP THE WORKSPACE. Dual element LED light illuminates poorly lit shop environments and awkward automotive jobs
ULTIMATE USER CONTROL. Precise variable speed trigger allows you to control power output and avoid damage to small fasteners
This is a used item and may show some signs of wear. The item has been tested and functions as it should.
Pre-owned but in working condition.
Unit points up/down and front to add squaring to plumb, level and align capabilities
One-person does the job of two people using manual plumb bob
In-track design makes unit easy to move, maintains right height
Multi-purpose mounting attachment allows unit to be used virtually anywhere
Integrated reference lines – for precise positioning of tool and transfer of points
Pocket-sized – only 4-1/8 In. (105 mm) tall; pouch fits on tool belt
Easy access battery compartment
Easy field recalibration – maintains accuracy and prevents downtime
Schwaben professional quality line wrenches offer superior resistance to spreading and cover 10 sizes 7 mm to 17 mm. All wrenches are 6 point which helps to prevent rounding of nuts. Open slot design allows wrench to slip over an existing line. .
Wrench sizes include:
7 x 8 mm Satin Finish Double Head Flare Nut Wrench
9 x 11 mm Satin Finish Double Head Flare Nut Wrench
10 x 12 mm Satin Finish Double Head Flare Nut Wrench
13 x 14 mm Satin Finish Double Head Flare Nut Wrench
15 x 17 mm Satin Finish Double Head Flare Nut Wrench
These are gently used items and may show some wear. The items have been tested and function as they should.
This special low profile socket set will get you out of a jam in tight quarters
Set Contains -
5 ( missing 1) stubby triple square with 12 mm hex to be used with included 12 mm ratcheting wrench. 4 mm, 5 mm, 6 mm, 8 mm and 10 mm.
4 stubby triple square with 19 mm hex to be used with included 19 mm ratcheting wrench.. 12 mm regular and 14 mm, 16 mm and 18mm tamper proof triple square.
Set also includes a 3/8" drive 12 mm socket and 1/2" drive 19 mm socket to fit bits. Good for using bit with ratchet or torque wrench.
9 torx bits 10 to 70 torx
Includes blow molded case with sturdy foam insert to keep every thing in order.
These are gently used items and may show some signs of wear. The items have been tested and function as the should.
This Professional quality 1/4" drive set is perfect for those small fastener jobs.
Set contains one of each:
Shallow 6 point sockets 4 thru 14 mm.
Deep 6 point sockets 4 thru 13 mm.
Fine tooth 1/4" drive ratchet with push button socket release.
1/4" drive Extensions, 1.5" and 6".
1/4" flex Joint.
1/4" driver.
Black blow molded case for portability and security.
THIS SET IS GENTLY USED AND MAY SHOW SOME SIGNS OF WEAR. THE ITEM HAS BEEN TESTED AND FUNCTIONS AS IT SHOULD
RYOBI introduces the 18V ONE+ Cordless Reciprocating Saw. Equipped with a 1 in. stroke length and 3,400 SPM this saw is ideal for fast cuts through mutliple materials. The easy blade release lever ensures simple blade changes to quickly switch between cutting applications to complete over 145 cuts per charge. The variable speed trigger and pivoting shoe maximize control throughout the duration of the cut. Best of all, it is part of the RYOBI ONE+ System of over 280 Cordless Products that all work on the same battery platform.
Over 145 cuts per charge
Fast cutting with up to 3,400 SPM and 1 in. stroke length
Easy blade release lever for quick blade changes
Variable speed trigger for precise cutting
Pivoting shoe for user control
THIS IS A LIGHTLY USED ITEM AND MAY SHOW SIGN OF WEAR. THIS ITEM HAS BEEN TESTED AND WORKS AS IT SHOULD
Schwaben 46 Piece 1/4″ Driver Set
13PCS-1/4" DR.6PT SOCKETS: 4, 4.5 , 5 ,5.5 ,6 , 7, 8 ,9 ,10, 11, 12, 13, 14MM
1PC- 1/4" DR. QUICK RELEASE RATCHET (72T).
2PC- 1/4" DR.50 & 100MM EXTENSIONS
1PC- 1/4" DR.150MM FLEXIBLE EXTENSION
1PC- 1/4" DR.UNIVERSAL JOINT
1PC- 1/4" DR.SLIDING T-BAR
1PC- 1/4" DR.6" SPINNER HANDLE
1PC- 1/4" DR.1/4" BIT HOLDER ADAPTER
4PCS-HEX KEY WRENCHES:1.27, 1.5,2,2.5MM
6PCS-1/4" HEX SOCKETS:3,4,5,6,7,8MM
3PCS-1/4' SLOTTED SOCKETS:4,5.5,7MM
3PCS-1/4" PHILIPS SOCKETS:PH1, PH2, PH3
3PCS-1/4"POZI SOCKETS: PZ1, PZ2, PZ3
6PCS-1/4" TORX SOCKETS: T10, T15, T20, T25, T30, T40
THESE ARE GENTLY USED ITEMS AND MAY SHOW SOME SIGNS OF WEAR. THE ITEMS HAVE BEEN TESTED AND FUNCTION AS THEY SHOULD.
Get durability, performance and Constant Power Technology (CPT) for your toughest applications. The Milwaukee 5317-21 1-9/16 in. SDS-Max Rotary Hammer offers a heavy-duty 5.5 ft. lbs. of impact energy for solid performance, even when drilling in hard aggregate. Constant Power Technology ensures consistent drilling power for the toughest applications handled by electrical, mechanical, plumbing, HVAC and general construction contractors. A 12-position chipping adjustment lets you maintain the optimum hammer position while chipping in any orientation. A mechanical clutch protects the motor when the bit binds, and two-mode operation offers maximum versatility regardless of the application. The tool comes with a side handle and carrying case.
Superior Milwaukee durability delivers maximum life even in the toughest concrete applications
Powerful hammer mechanism: delivers 5.5 ft. lbs. (7.5J) of impact energy for drilling in hard aggregate
Powerful 10.5 Amp motor: delivers 450 RPM and 3,000 BPM
Mechanical clutch: protects the tool when the bit binds up
2-mode operation: rotary hammer and hammer only for maximum versatility
CPT - Constant Power technology: delivers consistent performance in tough applications
12-position chipping adjustment: allows the user to maintain the desired hammer position while chipping in any orientation
Includes: (1) 5317-21 1-9/16 in. SDS max rotary hammer, (1) carrying case, (1) side handle
THIS IS A LIGHTLY USED ITEM AND MAY SHOW SIGNS OF WEAR. THE ITEM HAS BEEN TESTED AND FUNCTIONS AS IT SHOULD.
The dewalt combo kit includes:
ATOMIC 20V MAX Cordless Brushless Compact 1/2 in. Drill/Driver
20V MAX Cordless 6.5 in. Sidewinder Style Circular Saw
1 20V 6.0 AH battery
1 20V 5.0 AH battery
2 20V 4.0 AH batteries
3 20V 1.5 AH batteries
1 charger
These are used items and will show some wear. The items have been tested and function as they should.
The MILWAUKEE® M18 FUEL 2-Tool Combo Kit has the Most Powerful Drill, including AutoStop™ Control Mode for enhanced safety and the Fastest Driving Impact Driver. Includes an M18 FUEL 1/2" Hammer Drill, M18 FUEL 1/4" Hex Impact Driver, (2) M18 REDLITHIUM™ XC 5.0Ah Battery Pack, with an M18/M12 charger and carrying case. The M18 FUEL™ ½” Drill Driver is the Industry's Most Powerful Drill and Most Compact solution. The POWERSTATE™ Brushless motor delivers the most power under load to complete 2-9/16" Self-Feed holes in dense materials for increased productivity and capability. At only 6.9” in length, this is the most compact drill in its class. The AutoStop™ Control Mode offers enhanced safety for the user by preventing over-rotation in a bind-up with the best reaction time in the industry. The M18 FUEL™ ¼” Hex Impact Driver is the Most POWERFUL and FASTEST DRIVING impact driver, featuring ULTIMATE TRIGGER CONTROL. The POWERSTATE™ Brushless motor delivers unmatched power for a full range of capabilities to complete the widest variety of applications. Increase productivity on the jobsite with the fastest driving speed without sacrificing power or control. REDLINK PLUS™ intelligence delivers ULTIMATE TRIGGER CONTROL by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials. The M18 FUEL™ 2-Tool Combo kit is part of the M18 system which is fully compatible with over 200+ solutions.
POWERSTATE™ Brushless Motor delivers the power to complete the widest range of applications of any hammer drill driver
POWERSTATE™ Brushless motor delivers unmatched power for full range of capability to complete the widest variety of applications
Increase productivity on the jobsite with the fastest driving speed of any impact driver without sacrificing power or control
Drill is only 6.9" in length for access into tight spaces and reduced fatigue
ULTIMATE TRIGGER CONTROL by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials
Fastest Drilling and Driving applications under load
Auto-Stop Feature to Protect from over-rotation in a bind-up for enhanced safety, equipped with a dedicated autostop light on foot of tool to indicate a protection event
Impact is only 4.47" for access in tight spaces
4-Mode Drive Control
2000 in-lbs of torque
Mechanical Clutch for consistency in driving a wide range of fasteners
Hammer Drill Mode for Fast Drilling into Brick, Block or Concrete
Up to 3900 RPM for the Impact Driver
Single Handed Bit Insertion for Ease of Use
Hammer Drill Mode for Fast Drilling into Brick, Block or Concrete
These are gently used items and may show some signs of wear. The items have been tested and function as they should.
This is a gently used item and may show some signs of wear. The sander has been tested and functions as it should.
This is a gently used item and may show some signs of wear. The Heat gun was tested and functions as it should.
This ryobi combo kit features:
ONE+ 18V LED AREA LIGHT
ONE+ 18V Cordless 5 1/2 in. Circular Saw
ONE+ 18V 18-Gauge Cordless AirStrike Brad Nailer
ONE+ 18V Cordless 1/2 in. Drill/Driver
2- 18V Lithium 1.5 Ah Batteries
2- 18V Lithium 4 Ah Batteries
1 charger
These are gently used items and may show some signs of wear. The items have been tested and function as they should.
Combo kit contains:
M12 FUEL 12V Lithium-Ion Brushless Cordless 1/2 in. Drill Driver
M12 FUEL 12-Volt Lithium-Ion Brushless Cordless 1/4 in. Hex Impact Driver
M12 12-Volt 1000 Lumens Lithium-Ion Cordless Rover LED Compact Flood Light
3 M12 12v batteries
1 charger
These are used items and will show some wear. The tools have been tested and function as they should.
This is a used item and will show some signs of wear. The drill has been tested and functions as it should.
Li-ion battery technology: fade free power and lighter weight than NiCd batteries
Powerful torque: 620 in-lbs to tackle a variety of applications
Keyless metal chuck: to ensure strong grip on the bit and easy bit replacements
Comes with one battery and one charger
This is a gently used item and may show some signs of wear. The item has been tested and functions as it should.
-TOOL ONLY-
This is a gently used item and may show some signs of wear. The item has been tested and functions as it should
Power pack features low discharge rate so your tools are ready for the job when you are
Lithium-ion technology promises longer run time and increased power
This is a gently used item and may show some signs of wear. The item has been tested and functions as it should.